Comparative assessment of free surface energy of cement clinker and carbonate rocks and the efficiency of their wetting with aqueous solutions of plasticizing additives

Мұқаба

Дәйексөз келтіру

Толық мәтін

Ашық рұқсат Ашық рұқсат
Рұқсат жабық Рұқсат берілді
Рұқсат жабық Рұқсат ақылы немесе тек жазылушылар үшін

Аннотация

The study of adsorption phenomena at the interface of solids and aqueous solutions of surfactants is the basis for identifying the mechanisms of plasticization, water reduction and air entrainment of mineral-water systems. Obviously, the free surface energy of the solid phase plays a special role in these phenomena. In this work, the components of this energy (acid-base and dispersion) for various mineral materials (cement clinker and limestones) were determined by the wetting angle method, and the effect of aqueous solutions of plasticizing additives on this indicator was estimated. It was shown that in materials with a relatively high SiO2 content, the acid component γs+ significantly prevails, while in materials with a low proportion of SiO2 and an increased content of CaO+MgO, the basic component γs– of the surface energy predominantly manifests itself. This allows us to estimate the efficiency of aqueous solutions of cement concrete plasticizers, which are strong anion-active substances that are intensively adsorbed on the surface of materials with a pronounced basic component. The wetting angle of cement clinker and limestones with aqueous solutions of industrial plasticizers of different nature was studied: “Polyplast Ligno” based on sodium lignosulfonates, polynaphthalene methylsulfonate “SP-1” and “PC-1701” – a modified polycarboxylate ether. It was found that the most effective of them was the superplasticizer “PC-1701”, which even at an insignificant concentration (0.1%) reduces the contact angle of wetting on the surface of medium-strength limestone by 29.3%.

Толық мәтін

Рұқсат жабық

Авторлар туралы

A. Belyakov

Kazan State University of Architecture and Civil Engineering

Хат алмасуға жауапты Автор.
Email: belyakoffandrrey@mail.ru

Engineer, Postgraduate Student

Ресей, 1, Zelenaya Street, Kazan, 420043

O. Khokhryakov

Kazan State University of Architecture and Civil Engineering

Email: olvik@list.ru

Doctor of Sciences (Engineering)

Ресей, 1, Zelenaya Street, Kazan, 420043

K. Nesterova

Kazan State University of Architecture and Civil Engineering

Email: nesterova4301@mail.ru

Master’s Student

Ресей, 1, Zelenaya Street, Kazan, 420043

I. Larionov

Kazan National Research Technical University named after A.N. Tupolev – KAI

Email: larionov_igor1999@mail.ru

Engineer, Postgraduate Student

Ресей, 10, K. Marxa Street, 420111, Kazan

Әдебиет тізімі

  1. Shakhova L.D., Kotlyarov R.A., Chernositova E.S. On the mechanism of action of cement grinding intensifiers. Tsement i Ego Primeneniye. 2023. No. 1, pp. 104–111. (In Russian). EDN: MQKKOW
  2. Tazhibaev K.T., Sultanalieva R.M., Konushbaeva A.T. Surface energy of minerals and rocks. Vestnik of the Kyrgyz State Technical University named after I. Razzakov. 2013. No. 29, pp. 261–267. (In Russian). EDN: YPHZGH
  3. Kalashnikov V.I., Moroz M.N., Tarakanov O.V., Kalashnikov D.V., Suzdaltsev O.V. New ideas about the mechanism of action of superplasticizers, co-ground with cement or mineral rocks. Stroitel’nye Materialy [Construction Materials]. 2014. No. 9, pp. 70–75. (In Russian). EDN: SNLKAH
  4. Vovk A.I. Adsorption of superplasticizers on the hydration products of Portland cement clinker minerals. Process patterns and structure of adsorption layers. Kolloidnyy Zhurnal. 2000. Vol. 62. No. 2, pp. 161–169. (In Russian). EDN: ZXFVRI
  5. Tarakanov O.V., Ivaschenko Yu.G., Erofeeva I.V. Influence of carbonate mineral additives on the formation of microstructure and strength of mineral binders. Regional’naya Arkhitektura i Stroitel’stvo. 2024. No. 1 (58), pp. 47–58. (In Russian). EDN: DQBVJX https://doi.org/10.54734/20722958_2024_1_47
  6. Smirnov D.S., Mavliev L.F., Khuziakhmetova K.R., Motyygullin I.R. Influence of mineral additive based on ground blast furnace slag on the properties of concrete and concrete mixtures. Izvestia of KSUACE. 2022. No. 4 (62), pp. 61–69. (In Russian). EDN: KQDLZR. https://doi.org/10.52409/20731523_2022_4_61
  7. Morozova N.N., Gulyakov E.G. Properties of concrete on zeolite-containing binder. Izvestia of KSUACE. 2023. No. 2 (64), pp. 27–39. (In Russian). EDN: LCQWVC. https://doi.org/10.52409/20731523_2023_2_27
  8. Batrakov V.G. Modifitsirovannyye betony. Teoriya i praktika [Modified concrete. Theory and practice. 2nd ed., revised and enlarged]. Moscow. 1998. 768 p. EDN: ZTDODP
  9. Plank J., Winter C. Competitive adsorption between superplasticizer and retarder molecules on mineral binder surface. Cement and Concrete Research. 2008. Vol. 38. Iss. 5, pp. 599–605. EDN: MKSHJD. https://doi.org/10.1016/j.cemconres.2007.12.003
  10. Gizzatullin A.R., Morozova N.N., Nesterova K.O. Functionalized fillers for use in cement concretes. Polimery v Stroitel’stve: scientific online journal. 2023. No. 1 (11), pp. 47–57. (In Russian). EDN: CBGPNV
  11. Ibragimov R.A., Potapova L.I., Korolev E.V. Study of structure formation of activated nanomodified cement stone by IR spectroscopy. Izvestia of KSUACE. 2021. No. 3 (57), pp. 41–49. EDN: XHUPYY. https://doi.org/10.52409/20731523_2021_3_41
  12. Can M.F. Determination of mineral surface energy using impact of rough topography. Physicochemical Problems of Mineral Processing. 2019. Vol. 55 (4), pp. 1002–1013. https://doi.org/10.5277/ppmp19022
  13. Arkhipov V.A. et al. Determination of wettability characteristics of powder materials. Izvestia of Universities. Physics. 2012. Vol. 55. No. 7–2, pp. 20–26. (In Russian). EDN: PXKTKR
  14. Valiev A.I., Starovoitova I.A., Suleimanov A.M. Adhesive interaction in a hybrid composite. Relationship of energy characteristics of phases with strength. Vestnik of the Belgorod State Technological University named after V.G. Shukhov. 2024. No. 3, pp. 17–26. (In Russian). EDN: NXNCHT. https://doi.org/10.34031/2071-7318-2024-9-3-17-26
  15. Ibragimov R.A., Korolev E.V., Bikaeva Yu.V., Larionov I.S. The contact angles of quartz and caustic dolomite powders after mechano-magnetic treatment. Stroitel’nye Materialy [Construction Materials]. 2024. No. 3, pp. 64–70. (In Russian). EDN: CUIUFP. https://doi.org/10.31659/0585-430X-2024-822-3-64-70

Қосымша файлдар

Қосымша файлдар
Әрекет
1. JATS XML
Жүктеу
2. Fig. 1. Wettability of a solid surface

Жүктеу (37KB)
Метадеректер
3. Fig. 2. Appearance of the Kruss FM40Mk2 Easy Drop goniometer and a “sessile drop” on the surface

Жүктеу (97KB)
Метадеректер
4. Fig. 3. Photographs of the surface of mineral material samples with optical magnification of 500×: а – cement clinker (Volsk); b – cement clinker (Magnitogorsk); c – limestone of the Minyar quarry; d – limestone of the Mikhailovsky quarry; e – limestone of the Chodrayal mine

Жүктеу (200KB)
Метадеректер

© ООО РИФ "СТРОЙМАТЕРИАЛЫ", 2025